✨ Custom AT-TEs ! ✨

✨Cargo starship ! ✨

A 'little' part of a larger idea I’m developing~

Right under the cut, closeups and some explanations !

Tiny container carrier :

It’s small, it’s adorable, and I still haven’t figured to how the container will be properly held, so the entire system underneath is improvised and will be subject to changes, hopefully.

Cargo closeups :

Lot more to say about this ! Firstly, that the support I gave it is very unstable, but that should be fixed later.

I was playing around with the idea of a small ship with six rows of container in an hexagon, and ended using a combination of 3-branched crossed around a technic axe to do that. Then, one thing following an other, I needed up with two sections connected by one of these large rings like you see in some movies for gravitational purposes. The entirety of this piece, at the exception of the very beginning of it, it held by a single long technic axe. Obviously, large transparent-blue rods to make reactor trails and truncated cones as the reactor bases. The ring is held by rods, too, with an upside down tread — getting them to have a proper circular shape was a complicated journey.

The colourful containers were another fun thing to do : firstly, getting all the right pieces and make the pattern not too regular. And to pretend they’re all connected by nothing, they’re only partially connected, and 'held' by an electromagnetic field figured by the transparent blue pieces on each side of the container rows, which would then be picked by the small container carrier above.

And now, the most important thing : the reason of why I absolutely needed to make this cargo, instead of anything else. It’s quite simple, actually. I needed to get the scale of these containers. Because. Because I had this idea to make a large, large trading spare station with a ring around a large axis, which would be the perfect excuse to make an awful lot of small spaceships. And for that, I needed something for scale, and since it’s a trading station, a container was my best bet. So I have a plan, which I’ll elaborate on probably next week, along a batch of my small ships.

✨Combat mech and pilot ! ✨

Closeups and lore under the cut !

Side and back closeups :

Minfig closeup :

So, lore I said.

Welcome on Earth, in a nearish future. WW3 happened, but after that, everything is going absolutely fine ! Lot of tasks are automated, no one had to work anymore, and thus, humanity worldwide become a society of entertainment. Films, videos, games, you name it. But of course, games are not 'real' enough, so some streaming platforms organised life-sized fighting games with giant machines. That couldn’t go wrong, right ? Right, in fact, a world-wide tournament was made, with always much complete arenas, and billions of watchers.

So, about this mech — and its pilot, too. This one is part of the original cast of the mech battles, a beautiful Mark One. All of them were the same, originally, with only colours to distinguish them.

Its pilot, skilled as he was, won the first season. Survived the second. And the third. And so, eventually, this one became the last one of the Mark Ones. And it won again, awarding enough of a prize for the pilot to upgrade it. It was also renamed Relic by the crowd.

Fully reworked, for the next season, Relic has been updated with a plasma beam and a heavy rotator cannon, fuelled by a large tank located on its back — if any other competitors ever attain this place.

With this upgrade, the commands, too, have been updated, with controllers now having holo-projections, and a much faster update rate. One has to imagine that these mechs were originally controlled in large rooms (similar to Jaeger command centers), but have been rendered light enough to be added to a living room, for amateurs. The pilot, however, did not change his original headset and suit, which is full of old equipments and souvenirs.

That’s it for this one, expect one of Relic’s competitors next week : Quake !

✨Quetza and its pilots !✨

Another combat mech ! And I have more in stock~ (See previous work here)

…and of course closeups and lore under the cut :}

Pilot closeups :

Mech closeups :

Lore !

(All the world’s lore can be found in the first of these posts)

So, this mech is quite impressive, notably because it’s one of the only of the arena featuring four arms ! Quite a complex model to handle, but devastating when mastered. Quetza’s been designed by the two sisters who pilot it.

This, too is unusual, because there’s usually only one pilot — two would require an extreme coordination. But the controls have been modified (you can see the controllers in the hands of the pilot, featuring controls on both sides of the objects, while most controllers only have one). These control the essential of the mech’s basic movements, and require to be very dexterous. The pilot using these is the one considered as the 'true' pilot, contrarily to here sister, who acts as a technic team on her own (hence why only of them wear something cool, and the other plain black clothes). But the so-called technical support is actually completely part of the mech’s piloting, because the holoscreen paired with a lone controller help to automate sword combos and general coordination.

Speaking of the swords, they obviously aren’t made of gold, but a good paint job after each battle can help fix that. This type of weapon caused some problems at the start of Quetza’s career, because without them, the mech was defenceless. This have been fixed with magnetic locks, which hold the swords in place while allowing flexibility.

And next time : …I don’t actually have a name for that one yet, you’ll have to wait-

The swords are also a hassle in real life, because they’re only connected to the hands through a meh illegal technic. You can barely see it on the first image, but they are connected to the back finger using a small claw/tooth, which does the job, but nothing more.

Also, I can’t fathom what set all the plates featuring stickers are coming from, if anyone has a lead, please tell me.

Finally, taking the first picture took me about 15 minutes because there was no angle that could reflect what I actually saw, which was terrible.

Bonus, because you held on until there :

Photo of Quetzal from my former shelf studio, not cropped, and with terrible focus (feel the pain I feel when I realise later that this is a terrible photo~)

✨Aroace pride flag✨

Since I’m mostly doing these as room decoration for me, I’m slowly running out of idea, but I’m open to taking requests (potentially with instruction, if anyone is interested, simply ask me) :}

(See previous work here)

✨Bionicle…Rahi ?✨

Yeah, I’m not sure what that one exactly is…But I like it.

I don’t currently have any other Rahi in stock (well, I do have one but it’s terribly ugly), however I do have one in the making, which might be ready for next week. Else, I have a few other things I might get at (including a fancy idea since it’s pride month, which I’m hoping to manage to pull off…). Of course, if you have ideas, I’d gladly hear them !

Aaanyway, rant aside, building details under the cut !

For once, legs are utterly simple, since they’re all made of a single blade piece. Nevertheless, I had to use feet somewhere, so you might notice that the entire spine is made of feet piled on top of each other. They are only connected near the tail by a single socket.

Speaking of the tail, it’s made of a weapon piece of Nuju Metru, but the connector was all twisted so I couldn’t use it as a proper weapon. Well, it gives some movement to the beast, so it’s a great thing still.

Similarly, the tongue/flame (I’m still unsure of which it is meant to be) is a partially broken Tahu sword. It’s not actually held securely, because it’s inserted in the technic pin connector of the dark red shoulder blade I’m using as the face of the beast. On each side of this piece are silver Bohrok eyes as teeth, which themselves are partially covered with limb armor pieces.

The main body is not actually very complex, because I found a quite large red technic piece which looks somewhat like a throne and acts as a great base (if anyone has any idea where this piece comes from, based on this very unclear description, I’d like to know where it comes from); and four small blades placed horizontally to make the body slightly rounder.

You will notice this Rahi can actually more or less fit in my shelf studio, which is quite remarkable, because it means I don’t have to set up a temporary studio all over again. Might have to do it for the next build, though.

Also, I actually started my spreadsheet for bionicle gens ! (It incredibly tedious..)

✨Christmas tree !✨

…Yes, it’s a very tall picture…So tall, in fact, that you can actually see the top of my shelf studio. I made this last year, and I think it’s about the time to showcase it, along with this year’s project, which I’ll post next week !

Fun fact : the top of the tree isn’t connected at all to the rest, it’s only held in place without any stud. I also couldn’t find a neat star for the top of the tree, so I opted for another shiny pointy thing instead-

Ah, I knew a special occasion would present itself that would be worthy of this cat !

Get booped

Get booped back ! Ah !

Oh, and have an actual (Lego) cat while I’m at it !

✨Custom ice Toa !✨

And another one ! If the others were already experimental, this one is much, much more-

Closeups under the cut !

Front/back views :

That one was a lot of fun ! But it’s also not really stable, considering there are some weird piece combinations. This one also has disproportionate legs, compared to the rest of the body, but it’s alright.

With that one, I really tried to remain within Kopaka’s spirit (notice the ski blades and the Kanohi). The bow and arrow (which doubles down as a lance, and is using one of Kopaka’s blades), is a weapon I don’t think has been used before in the original bionicles (correct me if I’m wrong).

The arms/hands are using Pridak’s feet, because it works well and still allows for large movements.

I used some darker white pieces on the back and shoulders to get some slight contrats, and used technic pieces on the chest to get a proper body shape, with a leg piece underneath.

Legs :

(Too) Many details on the legs ! The blades under the feet are a combination of Kopaka Nuva’s blades and Glatoran blades, which also hold a shoulder piece used as a supplementary leg pieces.

Now is the here we enter the mess : all of the ankle sockets you can see are not used for the articulations, and are only here to keep the back piece in place (Star leg), while the actual socket is behind the technic gear plate. Then there is a socket which doesn’t even have a ball, it is directly stacked on top of another socket, and I use multiple feet to cover the leg areas which would expose how terrible the inside is. At the front, you might also notice a 1*2 curved slope tile held by two technic pins. It’s floppy, and it looks weird from the side, but the front appearance makes it worth it. Finally, at the front, I also use part of a Vahki’s head as a final plate, before we finally reach the connection between the legs and the body. As I said, that whole part is a mess.

Head :

Tried to remain close to Kopaka’s appearance here too, by adding a X-ray vision thing, but the most important part is that the Kanohi is Hero Factory Stormer’s mask, but sideways. The trans blue pieces are Borhok eyes, which fit perfectly, and I managed to cram a socket connector inside, making the head quite mobile and sturdy.

Next week is another one ! Not sure which of the three it will be, but I haven’t decided which one yet (tell me if you have a preference~).

I also finally received my new parts, meaning I can get back to working on my big project, yay !

✨Custom Bionicle !✨

Today (and next week, too) was a good excuse to get these out of their shelf and showcase them (and wipe the dust away, too.

These are my custom/modified Toa Ru-Fahi, which are a reeeally fun project.

Other angles and details under the cut !

Before going any further, I can’t not link this post, because I made the name of these customs out of it, and also because it’s just so good of a work. Just check it out.

Atuaga Ru-Fahi

The most custom of the ones I’ve made for this series, even if some might spot some inspiration from Kongu Mahri. It turned out to be more silver than black, but it nonetheless remains the Earth Toa. I’m quite happy of how it turned out, with the red accents to fit the weapons, and its overall shape. The contours of the body made with tubes are also something I had never done before. One of the techniques I use to get a thicker effect is to superpose two 'limb' pieces on top of each other; but I also have multiple usage of bohrok hand pieces to get rounder effets, with some texture.

The cable going through the mask is connected directly to the shoulders, and it has a purpose which will be explained somewhere underneath. Also, the Kanohi is Norik’s great Pehkui, which is probably one of the coolest of my (extensive) collection.

Gali Ru-Fahi

Have you recognised her ? Probably, I gave her name. Gali’s always been one of my favourites, so I had to include her. More specifically, this one is a modified version of Gali Mistika, because that whole set was already pretty good as is. Here again, probably went overboard with the silver pieces, but oh well. The tubes are connected to the top of the Kanohi, because there were already holes there. With this one, I used arm pieces to get the torso’s shape. The shoulder plates I have not touched, because they’re a nice unique part. The back piece is a Rahkshi’s foot (in shape, because there’s sadly no dark blue Rahkshi).

The weapons are just a long axe covered by a tube, and the heads are stolen from another Gali (the new gen ones).

Lore-wise, I don’t really have anything for these, except that this Toa team is made out of Toa from different teams (chosen arbitrarily for their look) and are fighting is space (hence the breathing tubes, which is the element I keep on all these customs (only two here, but I promise two more next week). If anyone has any idea, I’m open. Considering what else I’ve on my shelves, the bad guys could be giant bugs, but that’s as far as my ideas go.

See you next week :}

Get booped

Get booped back ! Ah !

Oh, and have an actual (Lego) cat while I’m at it !